Keyword Search: 
Part No. Search: 
OO Scale N Scale G Scale Z Scale HO Scale Slot Cars & R⁄C

Your shopping basket is empty.  To add an item, click the "Buy" button

prodigy advance
Gaugemaster Controllers
O Scale Wargaming Architectural Narrow Gauge Tools+
Right Lines e-Zine Faller

PRODUCT SPOTLIGHT - Faller Sound Module

James Hickman

JAMES HICKMAN looks at the way to add sound to your layout.

Through the advance of digital technology in the model railway world, locomotives factory fitted with sound on board have found their way onto many of our well-loved layouts. We gladly listen to the sound of the 'chuffs' of a steam locomotive or the 'whirring' of a diesel engine, but there is always one thing missing to finish the scene; the sounds of the rest of the world. No matter how close you are to a locomotive in reality, there will always be something else you can here, and hey presto... now you can on your layouts too!

Faller Sound Module

The FA180730 Faller Sound Module is a programmable module separate from your controller, so can be used by both analogue and digital modellers alike, and is very easily set up.

So what do you get?

Included in the box is the following:

  • 1x Sound Module
  • 1x USB Memory Stick
  • 2x Speakers

This doesn't seem like much for such a seemingly complicated piece of kit, and it isn't. The beauty of this module is that it is fully customisable without the need of knowledge of electrical or audio systems. The clever part is the USB memory stick that is included. This stick contains all your software required for programming and setting up the module, and no, thatís not tricky either!

How do you set it up?

Again this is easy. The unit requires two wires from a 16v AC power supply. This can be found on the back of most controllers, alternatively the Gaugemaster GMC-WM1 transformer will do the trick. I would also recommend installing an On/Off switch to allow you to turn the unit on and off without having to either unplug or unwire it. The GM503 or GM507 switches are perfect for this. The connection of the speakers is by way of two push-on plugs, one for each speaker. The cable on the supplied speakers gives you enough for a localised impression of sound, but for larger layouts there is an added bonus. The unit also comes fitted with a 3.5mm stereo jack allowing the majority of over-the-counter speakers to also be connected. This is especially handy for those of you with old computer speakers as these usually also have a volume adjustment control, allowing the volume to be adjusted without needing to reprogram. The speakers included are not to be sniffed at however, as they are more powerful than those fitted to a standard laptop.

The only other connections you need to make are optional. The unit is equipped with 10 inputs that run along one side of it. These, when activated, tell the unit which sounds to play. The input method can be as varied as you like. The unit is capable of activating from the following switches as well as many others:

Gaugemaster Switch

GM510 Passing Contact switch. (Handy if you have some left over from installing your point motors!)

Gaugemaster Switch

GM513 Ė GM518 Push to make switches (Most commonly used for this purpose, push the button and the sound plays).

Gaugemaster Switch

GM99 Ė Reed Switch (Useful for activating sounds with locomotives / vehicles fitted with magnets)

The reed switches shown above are a brilliant way of activating at least some of the sounds on the module. If you are already using reed switches on your layout or DCC Concepts Powerbase, you will already have magnets fitted to your locomotives, and if you are using the Faller Car System, your moving vehicles can activate them too. This type of activation would be effective if the sounds being activated were related to the movement of the locomotives or vehicles, for example:

Example 1: The Locomotive

You may wish to activate the unit by way of reed switch and magnet attached to a loco. This would be handy for non-sound-fitted locomotives.

Scenario 1: as a locomotive enters a tunnel, it activates a whistle sound on the unit.

Scenario 2: as a locomotive passes a group of trainspotters you could activate the sound of cameras clicking.

Example 2: The Faller Car

As the Faller road vehicles move using a magnet running along an embedded guide, it is easy to add a reed switch in too.

Scenario 1: as the vehicle is moving it passes the driver's mother and gives her a little toot of his horn in acknowledgement.

Scenario 2: As a bus is leaving its bus stop, you could have the unit activate and hear the conductor announcing the next stop, do this at every bus stop and you can have him shout out the next stop of the full route.

The unit also comes with two Loco-Net ports allowing control of the unit in the usual Loco-Net way.

Why do I need to program it?

Well actually you donít. Out of the box the unit is ready to go, simply connect it us as mentioned above. Turn it on, and your layout will come alive with sound. There is a downside to this though. You are stuck with the pre-loaded sounds associated with each command as well as the high pitched background sounds of some very chirpy birds, not very helpful for those modelling Victoria Station in the middle of built-up intercity London.

This is where the computer software comes in. The USB memory stick included comes loaded with software that allows you to customise the sounds you hear and how and when you hear them. As previously mentioned, there are contacts that you can connect switches to that will enable you to activated the sounds. That is only one part of it however.

The unit is also capable of running a background track or tracks that will loop indefinitely. This is useful for the general sounds of birds chirping, cows mooing or the general hustle and bustle of everyday life. This will play throughout the on time of the unit, only stopping with the activation of another command.

Aside from this you can also have sounds playing 'now and again'. These sounds, like the background sounds, loop but are heard less frequently. All of this can be programmed and activated with the unit. For full details on programming the unit see the instruction manual that comes with the unit

Alternatively if you are yet to purchase it and want to know whatís involved, Click the following links for the instruction manuals in either German or English.

Note: The software which is installed onto the USB stick is in German so it is a good idea to keep a copy of the instructions laying around for reference.

Okay, I can do all that, but where do I record the sounds?

You donít need to! As well as having the installation software on the USB Memory stick, you also have a library of over 100 sounds installed at no extra cost. These range from sounds of locomotives, to birds tweeting, from dogs barking to church bells. To use these sounds install the software, program them in, and away you go.

What if I don't like the sounds or I can't find what I want?

Thatís not a problem either. Because the sounds are set up and programmed through a PC and USB Memory Stick, adding sounds is easy as well. Without going into too much depth on file types and audio manipulation, the easiest way is to copy and paste your sound files onto the memory stick. These files need to be in MP3 format to work. These could be sounds you have downloaded, or ones you have recorded yourself.

One step beyond!

If you, like me, enjoy messing around and experimenting with sound, you may want to add some glitz and glamour to your sound recordings. Reverberations are a common sound to hear as a train rattles past, as are station announcements. These can be a bit hard to recreate, however with some time effort and patience, a decent quality sound file can be obtained. There are numerous free and paid for software packages out there that enable you to change and edit sounds so do not feel afraid to give it a try. Personally I use a program called Audacity for editing my sound files as this is a simple, effective and easy to use program.

And Finally...

Hopefully this insight has wetted your appetite for added sound, and if you have any further questions please feel free to contact us here at Gaugemaster. This has been a very quick introduction to the unit as there is infinite possibilities on how to use this with your layout, it is impossible to name them all. If you would like further information on all that the unit can do; have a read through the instruction manual by clicking the link further up the page.

Hopefully in the coming months I will be able to revisit this unit in a later article, as well as some of the exciting other exciting products in the world of model sound.

Fordhampton Kits
Graham Farish
Oxford Diecast
Deluxe Materials
Revell Paints
Humbrol Paints
Train Tech
DCC Concepts
Facebook Instagram Twitter

We are always looking to make improvements to our website to try and improve the quality of your visit.  We would welcome your feedback and suggestions, so please do not hesitate to e-mail our webmaster with your comments.  Alternatively call us on 01903 884488.

Home  Cookies  Privacy Statement  Terms & Conditions  Site Map  Site Guide
WEEE Regulations  Glossary  Careers & Jobs

Tel –  +44 (0) 1903 884488  Fax –  +44 (0) 1903 884377  E-Mail us –  click here is a trading name of Gaugemaster Controls Ltd.
Registered in England No. 2714470, Registered office:
Gaugemaster House, Ford Road
Arundel, West Sussex, BN18 0BN, United Kingdom

VAT Reg. No. 587 8089 71

Copyright © 2003-2014 Gaugemaster Controls Ltd. All Rights Reserved.